iPECS UCP - 6. ATTENDANTS; 6.1 Active CPU (UCP) Display

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
365
4.4.5.9 LCD Display Mode - PGM 169
Selecting LCD Display Mode will display the data entry page. Click [Save] button after changing
Value.
Figure 4.4.5.9-1 LCD Display Mode
The LCD display mode sets the time (12/24 hr.), date (day/month order) and language. Refer to
Table 4.4.5.9-1 and Table 4.4.5.9-2 for a description of the modes and the data entries required.
Table 4.4.5.9-1 LCD DISPLAY MODES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
LCD Date Display
Mode
Sets the Date display as month/day or day/month.
DD-MM-YY
MM-DD-YY
MM-DD-YY
LCD Time Display
Mode
Sets the Time display mode as 12 hour or 24-hour
(military) time.
12 Hour Mode
24 Hour Mode
12 Hour
Language Display
Mode
Sets the Language used in the display; refer to
Table 4.4.5.9-2 below.
English
LCD Weekday Display
Mode
Sets the Day-of-Week (DoW) display mode:
no DoW display mm/dd/DoW, (alpha month
display, overrides setting of button 1 above.
display mm/dd/DoW, numeric month display,
overrides setting of button 1 above.
Follow - PGM169
BTN1/
Type1
(MM/DD WDY)/
Type2
(MM DD WDY)
Follow -
PGM169
BTN1