iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
513
Table 4.4.10.2-1 NETWORK SUPPLEMENTARY ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Alternate/Secondary
signal port
This signal port is used to add an alternate or
secondary receiving signal port. A default receiving
signal port is TCP 1720 and an additional signal port
will be opened if this field is configured to valid value.
When the system is installed behind xDSL modem,
the problem of consecutive second call can happen
by uncontrolled H.323 ALG function at xDSL modem.
This field can be used to solve the problem of
consecutive second call.
0,
1024-65535
0
4.4.10.3 Net CO Line Overview
Selecting Net CO Line Overview will be displayed as below.
Figure 4.4.10.3-1 Network CO Line Overview
To Next Page
Loading...
