iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
284
4.4.2.8 Internal Page Zone Access - PGM 118
Selecting Internal Page Zone will display the Internal Page Zone data input page. Enter a valid
station range and click [Load] to enter the Internal Page Zone Access data. Check the
appropriate boxes to allow or delete access to each Internal Page Zone. Click [Save] button after
changing Value to apply.
Figure 4.4.2.8-1 Internal Page Zone
Each iPECS IP and LDP Phone is assigned to receive announcements from each Internal Page
Zone. A station can be assigned to any, all or no zones. Note a remote station or a station not
assigned to any Internal Zone will not receive any page announcements including Internal All Call.
As a default, all stations except remote stations are assigned to zone 1.
To Next Page
Loading...
