iPECS UCP - Ipecs Feature Server Voice Mail Group (UMS-VM) Attributes

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
423
Figure 4.4.6.3-7 iPECS Feature Server Voice Mail Group (UMS-VM) Attributes
Table 4.4.6.3-7 FEATURE SERVER VOICE MAIL GROUP ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
VSF Announce 1
Timer
If all stations in the group are busy when a call is offered,
the call may continue to wait (queue) for an available FS-
VM channel. If the queue period exceeds the VSF
Announce 1 Timer, the call is sent to a VSF
announcement. If the timer is set to 000, the call will
receive the first announcement, in full, prior to the station
process (guaranteed announcement).
000~999
(seconds)
015
VSF Announce 2
Timer
After the 1st announcement, a 2nd Announcement Timer
is activated. At expiration, if the call remains queued to
the group, the call is sent to the assigned VSF Announce
2 Location.
000~999
(seconds)
000
VSF Announce 1
Location
Each group can be assigned an announcement, which is
played if the call remains queued beyond the VSF
Announce 1 Timer duration. The announcement location
is a VSF Announcement number. An entry of 00
indicates
no announcement.
00~200 00: none
VSF Announce 1 Auto
Drop
If this attribute is selected, the call will drop after the 1st
VSF announcement.
Check box
VSF Announce 2
Location
The Group can be assigned a 2nd announcement, which
is played if the call remains queued beyond the VSF
Announce 2 Timer duration. The announcement location
is a VSF Announcement number. An entry of 00 indicates
00~200 00: none