iPECS UCP - S;W Upgrade

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
578
4.5.1 S/W Upgrade
iPECS system employs a NAND based memory file system thus, html, UCP/MPB upgrade and
iPECS appliance image files can be uploaded without impact to the current database. All of
iPECS series modules can be upgraded by remote access through the system. Selecting S/W
Upgrade from the Maintenance page displays the Appliance Version page and sub-menus
display in the left frame as shown in the following figure.
Figure 4.5.1-1 S/W Upgrade
There are two types of upgrade images: application and kernel image. If both are required,
upgrade the kernel first and then the application.
The VMIU is part of the MPB and VSF prompts are upgraded by uploading prompt files to the
MPB. VMIB prompts are upgraded by direct upload of prompt files to the VMIB.