iPECS UCP - 2.77.3 SMDR Call Records

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
218
3.3.18 DECT ATTRIBUTES — PGM 491
DECT Attributes define functions associated with the DECT equipment and operation. Generally,
the entry will turn the feature ON (enable) or OFF (disable).
PROCEDURE:
DECT ATTRIBUTES
PRESS FLEX KEY (1-4)
1. Press the [PGM] button and dial 491.
Press the Flex button for the desired Attribute; refer to Table
3.3.18-1.
Use the dial pad to enter the required data.
Press the [Save] button to store the data entry.
Table 3.3.18-1 DECT ATTRIBUTES (PGM 491)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
1
AUTO CALL RLS
(1:ON/0:OFF) : OFF
If enabled, when the other party of
an active internal call disconnects,
GDC-450H/480H/500H returns to
idle.
0: OFF
1: ON
OFF
2
BASE FAULT ALARM
(1:EN/0:DIS) : DISABLE
If enabled, DECT Base station
(GDC-600BE) alarms are sent to
the Attendant.
0: Disable
1: Enable
Disable
3
CHAIN FAULT ALARM
(1:EN/0:DIS) : DISABLE
Not used. 0: Disable
1: Enable
Disable