iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
613
4.5.18 IP Gain Control
Audio gain for signals from and to each type of device is adjustable through the IP Gain Control
page. The default gain values for the system are set to match the Nation Code. For more
information to change Value, it is recommended that you ask your dealer or an authorized
Ericsson-LG Enterprise representative. We can’t guarantee the damage according to changing
Value arbitrarily.
Figure 4.5.18-1 IP Gain Control Main Page
4.5.19 Tone/ Ring Gain & Cadence Control
Selecting Tone Table will display the page shown. Here the tones, cadence and gain used with
features can be managed. For more information to change Value, it is recommended that you ask
your dealer or an authorized Ericsson-LG Enterprise representative. We can’t guarantee the
damage according to changing Value arbitrarily.
Figure 4.5.19-1 Tone/Ring Gain & Cadence Control Main Page
Control system tone/ring cadence and frequency.
System announcement or music can be provided instead of system ring/tone if it is assigned in
tone table.
To Next Page
Loading...
