iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
374
4.4.5.15 Serial Port Selections - PGM 175
Selecting Serial Port Selections will display the Serial Port Selections data entry page. For each
function select the desired output using the drop-down menu and, if a TCP channel is assigned,
enter the TCP port. Click [Save] button after changing Value.
Figure 4.4.5.15-1 Serial Port Selections
The system has six (6) serial ports (1 RS232, 3 TCP Channels and 2 USB serial). A serial port is
assigned to each function that requires a serial output.
To Next Page
Loading...
