iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
389
4.4.5.24 NTP Attributes - PGM 195
Selecting NTP Attributes will display the System NTP Attributes entry page.
Figure 4.4.5.24-1 NTP Attributes
The system can employ the Network Time Protocol (NTP) to synchronize the system time with an
NTP time server. The system requests the time from the NTP server at 10-minute intervals and
then determines the time differential. If the system time is more 2 seconds off the NTP time, the
system time is adjusted to synchronize with the NTP server time.
To Next Page
Loading...
