iPECS UCP - Flexible Number Plan; Flexible Numbering Plan - PGM 106 ~ 109; Flexible Numbering Plan Codes

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
258
4.4.1.8 Flexible Numbering Plan - PGM 106 ~ 109
Selecting Flexible Numbering Plan will display the input entry page. Selecting the blue colored
text in the Table header will sort the table based on the selected column. Click [Save] button after
changing Value to apply.
Figure 4.4.1.8-1 Flexible Number Plan
Feature dial codes for the system can be assigned using the system‘s Flexible Number Plan.
Feature codes should be one (1) to four (4) digit in length and must not conflict. For example,
Feature codes 53 and 536 represent a conflict. The system will not update the database until
correct data is entered. Table 4.4.1.8-1 provides a brief description for each feature and the
default codes as they appear in
Numbering Plan 2. The default values for other numbering plans,
which may be selected on the title “System ID (100)” and other numbering plan is described in
Appendix B.
Table 4.4.1.8-1 FLEXIBLE NUMBERING PLAN CODES
Order ATTRIBUTE DESCRIPTION DEFAULT
1 Internal Page Zone Internal Page Zone access codes.
eMG80:301~335
eMG800:*301~*400
UCP:*301~*400
2
Internal All Call Page
Internal All Call Page access code.
*543
3
Meet Me Page
Meet-Me-Page answer code.
*544
4
External Page Zone – 1
External Page Zone 1 access code.
*545