iPECS UCP - 9.3 Mobile Native Voice Support for UCS Mobile client

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
408
4.4.6.2 Station Group Assignment - PGM 190
Selecting Station Group Assignment will display the Station Group data entry page. Enter the
desired Station Group number and click [Load] to display the Group Assignment.
Figure 4.4.6.2-1 Station Group Assignments
Under Station Group Assignments the type, members and Pick-Up attributes are assigned to the
Station Group. Note for the Net VM group, the network number must be assigned as the Net VM
group member station.
Table 4.4.6.2-1 STATION GROUP ASSIGNMENT
ATTRIBUTE − DESCRIPTION RANGE DEFAULT
Group Type Defines the type of station group.
N/A,
Circular,
Terminal,
ACD,
Ring,
Voice Mail,
Pick-Up,
VSF-VM,
UMS VM,
NET VM,
UCS
N/A
Pick-up Attribute
Stations can pick-up group calls ringing at other
stations in the group. This does not apply to the VM
groups.
OFF
ON
OFF
Member
Assigns stations as members of a station group or, for
the Net VM group type, defines the Net Number of the
group.
-