iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
417
Figure 4.4.6.3-3 Ring Group Attributes
Table 4.4.6.3-3 RING GROUP ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
VSF Announce 1
Timer
If all stations in the group are busy when a call is offered,
the call may continue to wait (queue) for an available
station. If the queue period exceeds the VSF Announce 1
Timer, the call is sent to a VSF announcement. If the timer
is set to 000, the call will receive the first announcement,
in full, prior to the hunt process (guaranteed
000~999
(seconds)
015
Guar-Ann(Timer 0)
Wait If Busy
When a call assigned to receive a guaranteed
announcement arrives and all channels are busy, the call
may wait with Ring back until a channel is available (ON)
or bypass the announcement. (OFF)
OFF
ON
ON
VSF Announce 2
Timer
After the 1st announcement, a 2nd announcement Timer
is activated. At expiration, if the call remains queued to the
group, the call is sent to the assigned 2nd VSF
000~999
(seconds)
000
VSF Announce 1
Location
Each Ring Group can be assigned an announcement,
which is played if the call remains queued beyond the VSF
Announce 1 Timer duration. The announcement location is
a VSF Announcement number. An entry of 00 indicates no
announcement.
00~200 00: none
To Next Page
Loading...
