iPECS UCP - Page 433

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
418
Table 4.4.6.3-3 RING GROUP ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
VSF Announce 1
Auto Drop
If this attribute is selected, the call will drop after the 1st
VSF announcement.
Check box
VSF Announce 2
Location
The Ring Group can be assigned a 2nd announcement,
which is played if the call remains queued beyond the VSF
Announce 2 Timer duration. The announcement location is
a VSF Announcement number. An entry of 00 indicates no
announcement.
00~200 00: none
VSF announce Auto
Drop
If this attribute is selected, the call will drop after the 2nd
VSF announcement
Check box
VSF Announce 2
Repeat Timer
The 2nd announcement can be repeated to calls that
remain in queue at intervals of the VSF Announce 2
Repeat Timer. Note VSF Announce 2 Repeat below must
be “ON”.
000~999
(seconds)
000
VSF Announce 2
Repeat
After the 2nd announcement, if the call remains queued to
the group, the 2nd VSF announcement can be repeated at
the VSF Announce 2 Repeat Timer interval, defined
above.
OFF
ON
OFF
Overflow Destination
A call to the group will continue to ring group member
stations until answered. The call will remain at the last
station or routes to the assigned Overflow Destination. If
VSF Announce is assigned, Auto Drop is available.
STA/NET or Station
Group,
VSF Announcement,
Auto Drop,
System SPD
Overflow Timer
A call to a group will remain in the group or route to the
assigned Overflow Destination after expiration of the
Overflow Timer.
000~600
(seconds)
180
Wrap-Up Timer
After terminating group call, a Station Group member will
be maintained in a busy state for the duration of the Wrap-
Up Timer.
000~999
(seconds)
002
Music Source
A Music source can be assigned so that calls to the group
will receive audio from the assigned source in place of
ring-back tone.
Ring back tone/
Internal Music/
External Music/
VSF MOH/
SLT MOH1~5/
VSF MOH2~3
Internal
Music
Maximum Queued
Call Counter
When the number of calls queued to the group match this
parameter, new calls will receive error tone and be
disconnected after the VSF AA announcement, if
assigned, is played.
00-99 99
Allow Forward
Member
A member activating Call Forward may be placed in an
unavailable state for Station group calls (ON). When OFF,
group calls are sent to the member as normal.
OFF : no FWD
ON : FWD
ON
Group name
A group name can be designated.
Max.12 characters
Mailbox Message
Wait Station
When a call overflows or routes to the VM group, a station
number is used to identify the Mailbox for the group
messages.
Station number
Mailbox Password
The password associated with the group Mailbox is
defined here. The password is used in conjunction with the
group Mailbox as with a normal station.
Max. 12 digits
Forced Forward
Calls to a Station group may forward directly to a defined
STA/NET or Station