iPECS UCP - Ringing Line Preference Priority

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
372
4.4.5.13 Ringing Line Preference Priority - PGM 173
Selecting Ring Line Preference Priority will display the Ringing Line Preference Priority data entry
page. Click [Save] button after changing Value.
Figure 4.4.5.13-1 Ringing Line Preference Priority
When multiple calls are ringing at the same time to a station assigned Ringing Line Preference,
the order of preference is based on the type of call: CO/IP Transfer, CO/IP Recall, Incoming call,
CO/IP Queue. A queued CO/IP call is always assigned the lowest priority.