iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
371
4.4.5.12 PBX Access Codes - PGM 172
Selecting PBX Access Codes will display the PBX Access Codes data entry page. Click [Save]
button after changing Value.
Figure 4.4.5.12-1 PBX Access Codes
When the system is used “behind” a PBX/CTX, the system needs to recognize the PBX/CTX
Trunk access codes to implement proper dialing restriction, tone detection sequences and Flash
timing. A maximum of four (4) Trunk Access Codes of one (1) or two (2) digits can be entered.
To Next Page
Loading...
