iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
546
4.4.13.9 Zone Holiday Assignment - PGM 444
Selecting the Zone Holiday Assignments returns the data input page. Enter the desired Source
and Destination Zone numbers range and click [Load] to assign Zone holiday. Click [Save]
button after changing Value.
Figure 4.4.13.9-1 Zone Holiday Assignment
Holidays and vacation day intervals for each zone can be established to define the Service mode
(Day, Night, and Timed) Up to 40 holidays and 5 vacation intervals can be defined.
Table 4.4.13.9-1 ZONE HOLIDAY ASSIGNMENT
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Ring Mode
Enter the desired Service mode for the Holiday or
Vacation.
Day Ring Mode/
Night Ring Mode/
Timed Ring Mode/
Timed Ring
Mode
Vacation
Five ranges may be entered for vacation periods, enter
the start and end dates as YY/MM/DD – YY/MM/DD.
Must be 12 digits None
Holiday
Each Zone can have up to 40 holidays assigned,
entering the date as MM/DD.
Must be 4 digits None
To Next Page
Loading...
