iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
489
4.4.9.9 Authorization Codes Table - PGM 227
There are two Authorization Code Tables, the System Authorization Code Table and Station
Authorization Code Table. Selecting Station Authorization Code Table will display the data entry
page in Figure 4.4.9.9-1 and selecting System Authorization Code Table will display the page in
Figure 4.4.9.9-2. Enter a Station or System Index range and click [Load] to modify the data. For
convenience, the copy, paste, and drag is available to enter or modify data. Please click [Save]
button to apply after changing Value.
Figure 4.4.9.9-1 Station Authorization Code Table
User can change the authorization code and COS for the station range across the board and click
the Range save button to save.
To Next Page
Loading...
