iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
429
4.4.6.7 Personal Group - PGM 260
Selecting Personal Group will display the Personal Group entry page. Enter a valid Personal
Group number and click load to enter group data.
Enter Group Number
: eMG80: 1-70 / eMG800: 1-600 / UCP: 1-1200
Figure 4.4.6.7-1 Personal Group
Several stations can share same station number. That means Personal Group is extended
feature of Linked Pair.
A Personal Group is composed with a master station and several member stations.
A master station and all member stations share master station‘s number.
In case of Member station, each member station can be set the delay (Dly) time.
By using this shared number, almost features (Call To xxx / Call From xxx / SMDR / Message
Wait…) can be activated.
But, some features can be chosen by PGM 261 attribute about all station activating or individual
station working.
In PGM 260, Personal group master and member can be assigned.
In PGM 261, Personal group attribute can be set.
To Next Page
Loading...
