iPECS UCP - 8. SIP EXTENSION; 8.1 SIP Phone Support

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
398
4.4.5.30 VM COS Attributes – PGM 253
Selecting VM COS Attributes will display the VM COS Attributes data entry page. Select a valid
VM COS and click [Load] to enter VM COS data. Click [Save] button after changing Value.
Figure 4.4.5.30-1 VM COS Attributes
VM COS establishes various common characteristics of the user’s Voice Mailbox including
greeting and message length, E-mail notification, message retention, etc.
Table 4.4.5.30-1 VM COS ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Greeting Length
This defines maximum user greeting length.
0-99 (Seconds)
60
Message Length
This defines maximum user message recording time.
0-600 (Seconds)
0
Number Of
Messages
This defines maximum number of voice mail message. 0-250 0
Retention Time
Voice mail messages will be automatically deleted after
this number of days.
0-99 Days 0
E-Mail Notification
E-mail notification can be enabled or disabled and, if
enabled, the message can be deleted after notification.
Disable/
Notification Only/
Notification &
Delete
Notification &
Delete
Future Delivery
Message
Future Delivery of messages can be enabled or
disabled.
OFF
ON
OFF
Confirm Message
Receipt
Confirm message receipt can be enabled or disabled.
OFF
ON
OFF
Private Message
Mark
Private message mark can be enabled or disabled.
OFF
ON
OFF