iPECS UCP - Page 412

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
397
- Index 1: If an incoming call on a CO/IP Line from group 2 has digits “456**” then seize
CO group 1 and send digit 123456.
- Index 2: If an incoming call on a CO/IP Line from group1 has digits “42*555” then seize
the first CO/IP Line and send digit 123456.
- Index 3; if an incoming call on a CO/IP Line from group 5 has digits “353” then seize CO
group 1 and send digit 123456 as a transit-out call over the Network.
- Index 4: If an incoming call on a CO/IP Line from group 5 has digits “401” then activate
DISA and await digits from the caller.