iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
290
4.4.2.13 Station IP Attributes - PGM 122
Selecting Station IP Attributes will display the Station IP Attributes data input page. Enter a valid
Station range and click [Load] to enter the Station IP Attributes data. Use the check mark to
indicate which attributes to modify; data for checked attributes is stored by clicking [Save] button.
Figure 4.4.2.13-1 Station IP Attributes
Stations are allowed access to the systems VoIP resources based on the Station IP Attributes.
To Next Page
Loading...
