iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
239
4.3.5.9 Set IP Information
The IP Information page establishes the IP address scheme. DHCP can be enabled or static
addressing can be configured. When the system is behind a firewall, the Firewall address must
be entered allowing proper operation with remote users, devise and SIP trunks. A DNS (Directory
Name Server) for Domain Name resolution should also be entered on this page. Note that
changing any IP address in the system requires a system reset; the reset does not initialize data.
Figure 4.3.5.2-1 Set IP Information
To Next Page
Loading...
