iPECS UCP - 2.64 Outside Line Queuing

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
182
3.3.9.7 Flexible DID Conversion Table – PGM 231
When the received DID digits are converted as in PGM 230, the resulting 4 digit number may be
used as an index to the Flexible DID Conversion Table. The Flexible DID Table index is used
when DID Line is assigned a Conversion type 2; refer to PGM 145 Flex button 2. Based on the
index from PGM 230 and the system mode (Day, Night or Timed) a destination for the DID call is
determined. The destination can be a VSF AA Announcement with CCR assigned allowing
further routing of the call or can route using the ICLID routing tables.
PROCEDURE:
FLEX DID CONV TABLE
F1:INPUT F2:INIT F3:DEL
1. Press the [PGM] button and dial 231.
FLEX DID CONV TBL INPUT
ENTER BIN NO (0000-9999)
Select Flex button 1~3:
Flex button 1: Input new data
Flex button 2: Initialize Table
Flex button 3: Delete entry
Enter the bin number (Ex.0001)
TABLE BIN 001
PRESS FLEX KEY (1-9)
Use the dial pad to enter a Table index (0000~9999).
Press Flex button 1~9 to select the desired destination, refer
to Table 3.3.9.7-1.
Use the dial pad to enter the desired type and value for the
destination, refer to Table 3.3.9.7-2.
Press the [Save] button to store the data entry.
Table 3.3.9.7-1 FLEXIBLE DID CONVERSION (PGM 231)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
1
TABLE 001 NAME
………...
Name associated with the
destination.
11 characters
2
TABLE 001 DAY DEST
NONE (01-15)
Destination setting for Day Ring
mode.
01-15
3
TABLE 001 NIGHT DEST
NONE (01-15)
Destination setting for Night Ring
mode. Table 3.3.9.7-2.
01-15
4
TABLE 001 TIMED_R DEST
NONE (01-15)
Destination setting for Timed Ring
mode. Table 3.3.9.7-2.
01-15
5
TABLE 001 REROUTE DEST
NONE (01-15)
Destination setting for Reroute Dest
mode. Table 3.3.9.7-2.
01-15