iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
576
4.5 Maintenance
The Maintenance tab main screen displays information on the system software versions as well
as information on modules and terminals connected to the system. From this page, the database
upload/download, software upgrade, access control, license install and other management
functions shown in Figure 4.5-1 ~ 4.5-3 are accessed. In addition, at the top of the central screen,
detailed software version information is provided. Also, you can monitor the device in real time by
clicking [Real-time Device Monitoring].
As eMG/UCP software is being upgraded regularly, we cannot guarantee the software
version displayed and it may be different from the current version.
Among Menus on Maintenance, the following functions are not available at UCP2400.
1. VSF Prompt message
2. VSF System greeting
3. Voice Mail USB Backup on VSF Mail Management
You can monitor the current status about Device in real time. The new information is highlighted
in red.
Real time monitoring for Device
Figure 4.5-1 eMG80 Maintenance Main Page
To Next Page
Loading...
