iPECS UCP - VM COS Attributes - PGM 253

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
142
3.3.6.25 VM COS Attributes – PGM 253
Each Station is assigned one of the five Voice Mail Classes of Service. The VM COS attributes
include user greeting length, E-Mail notifications, message retention and optional message
marking.
PROCEDURE:
ENTER PGM NUMBER
1. Press the [PGM] button and dial 253.
VM COS ATTRIBUTE
ENTER COS RANGE (1-5)
Enter COS range from 1 to 5.
1-2 VM COS ATT
PRESS FLEX KEY (1-8)
Press flex button 1-8 for the desired setting, refer to Table
3.3.6.25-1.
Use the dial-pad to enter the desired data, refer to Table
3.3.6.25-1.
Press the [Save] button to store the data entry.
Table 3.3.6.25-1 VM COS ATTRIBUTES (PGM 253)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
1
GREETING LENGTH
(00-99) : 60
This defines maximum user
greeting length.
00-99 60
2
MESSAGE LENGTH
(000-600) : 000
This defines maximum user
message recording time.
000-600 000
3
NUMBER OF MESSAGE
(000-250) : 000
This defines maximum number of
voice mail message.
000-250 000
4
RETENTION TIME
(00-99) : 00 (DAYS)
Voice mail messages will be
automatically deleted after this
amount of days.
00-99 00
5
E-MAIL NOTIFICATION
(0-2) : NOTI. DELETE
E-mail notification can be enabled
or disabled.
0: OFF
1: Notification
2: Notification
& Delete
Notification &
Delete
6
FUTURE DELEVERY MSG
(1 :ON /0 :OFF) : OFF
Future Delivery message can be
enabled or disabled.
0: OFF
1: ON
OFF
7
CONFIRM MSG RECEIPT
(1 :ON/0 :OFF) : OFF
Confirm message receipt can be
enabled or disabled.
0: OFF
1: ON
OFF
8
PRIVATE MSG MARK
(1 :ON/0 :OFF) : OFF
Private message mark can be
enabled or disabled.
0: OFF
1: ON
OFF