iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
1
1. INTRODUCTION
1.1 Manual Application
This document provides detailed information covering the configuration of the eMG/UCP
database and maintenance of the eMG/UCP. The manual also details the power-up and
initialization routines and the Station Web Portal.
The manual is written for the experienced installer with knowledge of telephony terms, and
functions of small and mid-sized business telecommunications systems.
1.2 Manual Organization
This manual is organized in ten (10) major sections including:
Section 1 Introduction: This section introduces the content and organization of the
manual.
Section 2 System & Admin Information: In this section general information on
System capacities, power-up routines and the system initialization process are detailed.
Also, this section discusses the process for registration of IP and softphones with the
system.
Section 3 Station Administration for eMG: This section provides details on
configuring the eMG system employing a station allowed administrative access. Step
by step procedures are given along with brief but concise descriptions of the various
configuration parameters and available settings. We recommend that you use Section
4 Web administration.
Section 4 Web Administration: Similar to the Station Administration section, the Web
Administration section gives step by step procedures and descriptions for the
configuration parameters and settings available using a Web browser.
- Section 4.5 Maintenance: The Maintenance section provides details on managing
the eMG including database upload and download, software upgrade, and user
access management using the Web browser interface.
- Section 4.6 Station Program: This section discusses the configuration of the
features and functions available in the portal.
- Section 4.7 On-line web user guide: This section explains the frequent use of
features to a user. We didn’t describe this section because you can easily get the
information on the web by clicking [User’s guide] of login page.
Appendix A: The Station and Attendant Station User Program codes are listed with the
associated function. These fixed codes are available at the iPECS IP or LDP phones to
configure basic functions such as ring tones, activate features and assign features and
functions to Flex buttons.
Appendix B: A complete listing of the nine basic Flexible Numbering Plans. One is
To Next Page
Loading...
