iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
611
4.5.16 Trace
The system software incorporates routines to monitor and output detailed call and feature
processing information, and event logs. Information is provided on a system or device level as
requested. Administrators can find the information on this page.
Figure 4.5.16-1 Trace Main Page
We explain [Packet Capture] and [Trace Log via web] among them because it is very useful to
use Web admin.
A user can start and stop capturing packets and download packet capture result. The dump file
will be replaced when new capturing is started.
Packet Capture
Default option is included. The file name is packetdump.cap. -i eth0 -w packetdump.cap -c 10000
- Option explanation
protocol filter: tcp or udp or icmp
port filter: both source and destination port -> port #number, source port -> src port #number,
To Next Page
Loading...
