iPECS UCP - H.323 Basic Attributes

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
521
4.4.11.1 H.323 Basic Attributes -PGM 326
Selecting H.323 Basic Attributes will display the data entry page. Click [Save] button after
changing Value.
Enter Device/GW slot sequence number
: eMG80: 1-300 / eMG800: 1-2890 / UCP: 1-3688
Figure 4.4.11.1-1 H.323 Basic Attributes
H.323 Signaling can be operated with each VOIB/VOIM or MPB/UCP.
Table 4.4.11.1-1 H.323 Basic Attributes
ATTRIBUTE DESCRIPTION RANGE DEFAULT
IP Band Usage
If it is set to ON, system allows H.323 signaling with
system IP address. Or, each VOIB/VOIM IP Address
can be used.
OFF
ON
OFF