iPECS UCP - Company (Tenant Group) Administrator Account; User Management

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
609
4.5.15 User Management
iPECS UCP supports up to 50 system accounts and up to ten (10) users may simultaneously
access system Web services. The default ID is ‘admin’ and the password is ‘1234’. The Access
privilege is determined based on the entered system account (ID/Password) and the privilege
assigned for the user.
Please follow up the below instructions to make User ID:
1) Maximum 16 characters & digits.
2) In English only.
3) First letter must be Alphabet. The rest are available: Alphabet, number, underscore (_).
4) Don’t use ‘blank’.
It is strongly recommended that a unique User ID and strong password be entered to
minimize the risk of admin and maintenance access by unauthorized personnel.
User should register more than a maintenance ID.
Figure 4.5.15-1 User Management
4.5.15.1 Company (Tenant group) Administrator Account
The main (maintenance) administrator of the system can make new administrator account for
each tenant group. The tenant group administrator can configure the system according to tenant
group and ‘Web access authorization’ in System Data. Managing the available feature will be
assigned Web Access Authorization in System Data.