iPECS UCP - 2.21 Call Waiting;Camp-On

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
65
3.3.3.15 Station VM Attributes – PGM 127
Voice Mail attributes can be assigned on a station basis. The description and valid inputs are
given in Table 3.3.3.15-1.
PROCEDURE:
ENTER PGM NUMBER
1. Press the [PGM] button and dial 127.
STATION VM ATT
ENTER STA RANGE
Enter Station Range.
100-110 STA VM ATT
PRESS FLEX KEY (01-20)
Press the desired Flex button.
Use the dial-pad to enter desired data, refer to Table
3.3.3.15-1.
Press the [Save] button to store the data entry.
Table 3.3.3.15-1 STATION VM Attributes (PGM 127)
BTN − ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
1
VM COS
(1-5) : 1
Voice Mail COS (Grade) can be set on
each station. Each COS attributes can
be set at PGM 253.
1-5 1
2
ADMINISTRATOR MAILBOX
(1:EN/0:DIS):DISABLE
If this option is set to ON, Administrator
Voice Mail feature can be accessed.
0: Disable
1: Enable
Disable
3
ANNC. ONLY MAILBOX
(1 :EN/0 :DIS) :DISABLE
If this option is set to ON, no message
can be left and only the greeting is
played.
0: Disable
1: Enable
Disable
4
ANNC. ONLY OPTION
(0-1):PREVIOUS MENU
This option is available only ANNC.
ONLY MAIL BOX is set to ON.
If Previous Menu, after greeting
message is played, go to previous
menu.
If Hang Up, after greeting message is
played, call is hanged up.
0: Previous
1: Hang Up
Previous
menu
5
COMPANY DIR FIRST NAME
…............
This field is first name of a station for
Company Directory feature.
Max 12 Char N/A
6
COMPANY DIR LAST NAME
…............
This field is last name of a station for
Company Directory feature.
Max 12 Char N/A
7
USER-MSG RW/FF TIME
(03-99):04 Sec
User Message Rewind / Fast Forward
are supported by this time.
03-99 04
8
NOTIFY REPEAT COUNT
(00-99) : 03
It is used to transfer call to attendant if
retry count is over this for VM
notification.
00-99 03