iPECS UCP - 2.22 Conference; 2.22.1 Conference Group

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
66
Table 3.3.3.15-1 STATION VM Attributes (PGM 127)
BTN − ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
9
NOTIFY DIAL TIME
(00-99) : 15 Sec
It is dial waiting time after provide
VMIU/VMIB announcement for VM
notification.
00-99
(seconds)
15
10
FORWARD OPTION
(0-1) : MOVE
When a left message is forwarded, this
option is applied.
0:Move
1: Copy
Move
11
CASCADE MAILBOX1
….
Message ca scading i s a f eature
that
copies messages left for the
originating
mailbox to another
mailbox. This field is
destination mail box station.
Station No. N/A
12
CASCADE MAILBOX2
….
13
CASCADE MAILBOX3
….
14
CASCADE MAILBOX4
….
15
CASCADE MAILBOX5
….
16
CASCADE METHOD
(0-2) : DISABLE
Cascade method is determined.
0:Disable
1: Copy
2: Move
Disable
17
CASCADE MESG TYPE
(0-2) : NORMAL ONLY
Cascade Message Type is determined.
0:Normal Only
1: Urgent Only
2:All
Normal
only
18
CASCADE APPLY TYPE
(0-2) : IMMEDIATE
Cascade Apply Type is determined.
Immediate: Cascade is done as soon
as a message is left.
After Notify Retry Count: After Notify
Retry Count is over, cascade is done.
After Cascade Timer: Cascade is done
after cascade timer.
0:Immediate
1: After Notify
Retry Count
2: After
Cascade
Timer
Immediate
19
CASCADE TMR(min)
(000-250) : 000
Cascade Apply Timer is set.
000 ~250
(min)
0
20
MSG WAIT NOTICE
(0-2) : TONE
When a user has voice mail, system
can provides this as voice prompt
instead of dial tone according to option
based on station.
Disable: System provides normal dial
tone when a user goes to off hook
status.
Tone: System provides warning tone
instead of dial tone to give indication
when a user goes to off hook status.
Prompt: System provides message
indication as voice prompt when a user
goes to off hook status.
0: OFF
1:Tone
2:Prompt
Tone