iPECS UCP - 6.7 Cabinet Alarm

To Next Page

To Previous Page

iPECS eMG80 & eMG800 & UCP

Administration and Programming Manual Issue 1.6

386

4.4.5.21 In-Room Indication - PGM 183

Selecting In-Room indication will display the In Room data entry page. Click [Save] button after

changing Value.

Figure 4.4.5.21-1 In-Room Indication

The Supervisor Station can set the In-Room Indication for all members in the In-Room indication

group. Up to 10 Supervisors (groups) can be configured can be programmed, and each can have

up to 20 members in the group, excluding the Supervisor.

ATTRIBUTE DESCRIPTION RANGE DEFAULT

Supervisor

This entry assigns the Station number for the In-

Room Group Supervisor.

Station number

Member 01~20

This entry assigns stations as members of the

In-Room Group.

Station number

Other manuals for iPECS UCP