iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
385
Table 4.4.5.20-1 SYSTEM TIMERS
ATTRIBUTE DESCRIPTION RANGE DEFAULT
modem mode for this time.
Call log/Directory Auto
Idle Timer
When the timer is set "xx" and there is no action by a
user while navigating call log/directory menu in a
station, the station will go to idle in case of on-hook
state.
If the timer is set to 0, the feature is not worked.
Condition
1. The call log auto idle timer is supported only below
phones.
- LIP-90xx series (9010/20/30/40)
- LIP-80xxE series (8012E/24/40E)
- LDP phones.
* Firmware of LIP-90xx and LIP-80xxE series should
be upgraded (LIP-90xx: A.0Eb or later version, LIP-
80xxE: A.1Fn or later version).
2. The DECT phone and LIP-9070 do not support the
directory auto idle timer.
00,
10-99 (1 sec.)
0
To Next Page
Loading...
