iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
236
4.3.5.4 Set Station Number
You want to change the current station number to New station number. In this page, you can
change the station number.
Figure 4.3.5.4-1 Set Station Number
4.3.5.5 Set Flexible Numbering Plan
The Flexible Numbering Plan defines the various digit strings (codes) users may dial to access
system resources (outside lines, page zones, etc.) and features. In the wizard, codes for features
that commonly may require modification are displayed.
Figure 4.3.5.5-1 Set Flexible Numbering plan
To Next Page
Loading...
