iPECS UCP - Static Route Attributes

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
399
4.4.5.31 Static Route Attributes – PGM 254
Selecting Static route Attributes will display the static route attributes data entry page. Click [Save]
button after changing Value.
Figure 4.4.5.31-1 Static Route Table Attributes
Table 4.4.5.31-1 STATIC ROUTE TABLE ATTIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Net address
Network IP address
IP address
Net mask
Net mask
Gateway IP address
Gateway(route) IP address
IP address