iPECS UCP - LCR Table Initialization

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
484
4.4.9.4 LCR Table Initialization - PGM 223
Selecting LCR Table Initialization will display the LCR Table Initialization data entry page. Click
[Initialize] button to initialize input data.
Figure 4.4.9.4-1 LCR Table Initialization
The LCR Table Initialization allows global values to be assigned to the various Digit Modification
Table entries. In addition, the LCR Leading Digits and LCR Digit Modification Tables can be
initialized to the default (no entries) state.
The CO group rage is from 1 to 21 for eMG80 and from 1 to 201 for eMG800/UCP.