iPECS UCP - 9. IPECS UCS CLIENT; 9.1 iPECS UCS Premium & Standard Client Support

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
404
4.4.5.36 PPTP Attributes
Selecting PPTP Attributes will display the PPTP Attributes Table data entry page. Click [Save]
button after changing Value.
Figure 4.4.5.36-1 PPTP Attributes
When required, the system supports Point to Point Tunneling Protocol (PPTP). PPTP must be
enabled and values for the PPTP server IP address, Id and password must be entered and a
server name may be entered.