iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
488
4.4.9.8 COS Table
Selecting COS Table will display the COS Table data entry page. Data can be filtered to display
specific modes and the values to change can be limited to a specific mode and type, Station or
System Authorization codes.
Figure 4.4.9.8-1 COS Table
Assignments for COS are made for the Day, Night, and Timed Ring for each station and system
Authorization code. The standard Station COS 1 to 11 is assigned to each Authorization code.
Note the COS may also be defined in the Station and System Authorization Code Tables.
To Next Page
Loading...
