iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
143
3.3.6.26 Personal Group – PGM 260
Several stations can share same station number. That means Personal Group is extended
feature of Linked Pair.
A Personal Group is composed with a master station and several member stations.
A master station and all member stations share master station‘s number.
By using this shared number, almost features (Call To xxx / Call From xxx / SMDR / Message
Wait…) can be activated.
But, some features can be chosen by PGM 261 attribute about all station activating or individual
station working.
In PGM 260, Personal group master and member can be assigned.
In PGM 261, Personal group attribute can be set.
PROCEDURE:
PERSONAL GRP ASSIGN
ENTER GRP NUM (01–70)
1. Press the [PGM] button and dial 260.
And Enter Group number (eMG80:1~7 /eMG800:1~600)
PERSONAL GRP 01
F1 : MASTER STA F2 : MEM
Press Flex button 1, register Master station.
Press Flex button 2, register member stations.
Use the dial-pad to enter the desired data.
Press the [Save] button to store the data entry.
To Next Page
Loading...
