iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
504
4.4.9.17 Mobile Extension Table - PGM 236
Selecting Mobile Extension Table will display the Mobile Extension data entry page. Select the
Station Order range desired, blue text above the table header. Selecting the blue colored text in
the Table header will sort the table based on the selected column. Click [Save] button after
changing Value.
Figure 4.4.9.17-1 Mobile Extension Table
A mobile phone can be used in conjunction with an iPECS Phone. The Mobile phone can access
system resources available to the user‘s wired phone and will receive ring for incoming iPECS
calls. The user may be allowed to enable the Mobile extension and define the mobile number.
The system can be defined to employ a specific CO/IP Line Group to place calls to the Mobile
phone. In addition, the mobile phone can be assigned to receive Station group calls to the
primary extension. Also, parameters for notification of new VSF voice mails can be defined.
Table 4.4.9.17-1 MOBILE EXTENSION TABLE
ATTRIBUTE DESCRIPTION RANGE DEFAULT
PGM Authority
The user may be allowed to activate the mobile
Disable
Disable
Usage
Mobile extension feature can be enabled and Fail
Over to Mobile extension can be included.
Disable
Mobile Ext
Disable
Station Group Call
Enable
When the paired station is a member of a Station
group (ACD, Circular, or Terminal), group calls can
be sent to the active mobile extension.
Disable
Enable
Disable
VSF Notify
When enabled the active Mobile Extension will
receive notification by the system when the user has
a new message in the built-in Voice Mail.
Unused
Use
Unused
Notify Retry
The number of attempts the system will make to
complete a notification when receiving busy/no-
1 – 9 Times 3 Times
To Next Page
Loading...
