iPECS UCP - Page 431

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
416
Table 4.4.6.3-2 ACD GROUP ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
CIQ #3 Page Alert -
Repeat Time
Interval for repeating the CIQ #3 Announcement. 000-180 005
Forced Forward
Destination
Calls to a Station group may forward directly to a
defined destination, by passing the hunt process.
“Forced Forward”, below, must be enabled.
STA./NET or
Station group,
VSF
Announcement,
Sys. Speed
Forced Forward Dest
Usage
Calls to a Station group may forward directly to a
defined destination, see above “Forced Forward
Destination” when Forced Forward is enabled for the
group.
OFF
ON
OFF
Auto Ring Mode
Reference table of Auto Ring Mode Table Time for ACD
Group Ring Mode. When Manual Change is selected,
the Group supervisor can change the ACD group ring
mode manually with ACD Group Ring Mode flexible
number.
Manual Change/
eMG: Table 0 ~ 15
UCP: Table 0 ~ 100
Manual
Change
Day Destination
When the ACD Ring Mode Table schedule is in the Day
mode, ACD group calls route to the destination defined
here.
Normal Service,
STA/NET or Station
group,
VSF
Announcement,
Sys. Speed
Normal
Service
Night Destination
When the ACD Ring Mode Table schedule is in the
Night mode, ACD group calls route to the destination
defined here.
Normal Service,
STA/NET or Station
group,
VSF
Announcement,
Sys. Speed
Normal
Service
Timed Destination
When the ACD Ring Mode Table schedule is in the
Timed mode, ACD group calls route to the destination
defined here.
Normal Service,
STA/NET or Station
group,
VSF
Announcement,
Sys. Speed
Normal
Service
ACD Group Queuing
Call Indication
If there are queued group calls, the queuing indication
can be served to group members by Mute Ring and
LED button flashing.
OFF
ON (RING and
LED)
ON (LED only)
OFF