iPECS UCP - Page 435

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
420
Table 4.4.6.3-4 EXTERNAL VOICE MAIL GROUP ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Overflow Timer
A call to a group will remain at the last station in the
group or be sent to the assigned Overflow Destination
after expiration of the Overflow Time.
000~600
(seconds)
180
Overflow Destination
A call to the group will continue to route through the
group until answered or all group members have been
tried. The call will remain at the last station or will
route to the assigned Overflow Destination. If
assigned VSF Announce, Auto Drop is available.
STA/NET or
Station Group,
VSF
Announcement,
Auto Drop,
System Speed
-
Forced Forward
Destination
Calls to a Station group may forward directly to a
defined destination, by passing the hunt process.
“Forced Forward”, below, must be enabled.
STA/NET or
Station group,
VSF
Announcement,
Sys. Speed
Forced Forward Dest
Usage
Calls to a Station group may forward directly to a
defined destination, see above “Forced Forward
Destination” when Forced Forward is enabled for the
group.
OFF
ON
OFF
Group Name A group name can be designated.
Max. 12
character
Server type
When a third party SIP server is used for AA/VM, or
the IPCR or third party SIP recording server is used,
the server type must be selected.
IPCR/
3rd party
3rd party
Server number
Each IPCR and third party SIP server must be
assigned a server number from 01 ~ 10 which
correlates this group with an Agent table.
eMG: 0-2
UPC:0-10
0
Member Type
Member type is assigned as SLT type or SIP Type. In
case of SIP Type, enter the capacity from 1-140 for
eMG80 & 1-1200 for eMG800 & 1-2400 for UCP.
eMG80:0-140
eMG800:0-1200
UCP:0-2400
(SLT Type/ SIP
Type)
SLT Type