iPECS UCP - Page 533

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
518
Table 4.4.10.6-1 NETWORK NUMBERING PLAN TABLE
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Remote route ID
system want to check the route ID value to authenticate
the system. Here, ‘Local Route ID’ is the route ID string
for local system. And ‘Remote Route ID’ is the route ID
string for remote system.
Max. 15 characters
Sending Name
option
Basically the calling party name is transferred in QSIG
messages. This field is an additional way to send the
calling party name. In some PBX systems, the Q.931
Display IE field is used to transferring the calling party
name and this value can be used as an interoperating
solution for displaying the calling party name.
OFF,
Display IE(CISCO)
OFF