iPECS UCP - 2.73.4 System Speed Dial

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
193
Table 3.3.9.15-1 DIGIT CONVERSION TABLE ATTRIBUTES (PGM 270)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
7
01/001 D1/T1 CHANGED
…………………..
The dialed digits are converted to this
digit stream when Apply Time type is
‘FOLLOW LCR’ and day zone is 1 and
time zone is 1.
Max. 24 digits
8
01/001 D1/T2 CHANGED
…………………..
The dialed digits are converted to this
digit stream when Apply Time type is
‘FOLLOW LCR’ and day zone is 1 and
time zone is 2.
Max. 24 digits
9
01/001 D1/T3 CHANGED
…………………..
The dialed digits are converted to this
digit stream when Apply Time type is
‘FOLLOW LCR’ and day zone is 1 and
time zone is 3.
Max. 24 digits
10
01/001 D2/T1 CHANGED
…………………..
The dialed digits are converted to this
digit stream when Apply Time type is
‘FOLLOW LCR’ and day zone is 2 and
time zone is 1.
Max. 24 digits
11
01/001 D2/T2 CHANGED
…………………..
The dialed digits are converted to this
digit stream when Apply Time type is
‘FOLLOW LCR’ and day zone is 2 and
time zone is 2.
Max. 24 digits
12
01/001 D2/T3 CHANGED
…………………..
The dialed digits are converted to this
digit stream when Apply Time type is
‘FOLLOW LCR’ and day zone is 2 and
time zone is 3.
Max. 24 digits
13
01/001 D3/T1 CHANGED
…………………..
The dialed digits are converted to this
digit stream when Apply Time type is
‘FOLLOW LCR’ and day zone is 3 and
time zone is 1.
Max. 24 digits
14
01/001 D3/T2 CHANGED
…………………..
The dialed digits are converted to this
digit stream when Apply Time type is
‘FOLLOW LCR’ and day zone is 3 and
time zone is 2.
Max. 24 digits
15
01/001 D3/T3 CHANGED
…………………..
The dialed digits are converted to this
digit stream when Apply Time type is
‘FOLLOW LCR’ and day zone is 3 and
time zone is 3.
Max. 24 digits
16
01/001 RING MODE TBL
(00–15) : 0
The dialed digits are converted
according to the auto ring mode time.
00-15 0
17
01/001 APPLY OPTION
(0–3): ALL
The Apply Option can be applied
according to the caller.
0. All
1. Reserved
2. CO Line
3. Disable
All
18
01/001 ARS CO ACCESS CO
. . . . . . . .
If a selected path is not available for
some reason (All Busy, Line Fault etc.
)
after digit conversion, Alternative
Route Selection (ARS) will connect
calls usi
ng predefined designated ARS
digit in digit conversion table.
Max. 8 Digits