iPECS UCP - Page 231

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
216
Table 3.3.16-1 VIRTUAL TRACE DIP-SWITCH (PGM 452)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
11
VIRTUAL TRACE DIP SW
SIP TRACE (OFF)
SIP Trace is enabled for output. 0: OFF
1: ON
OFF
12
VIRTUAL TRACE DIP SW
ISDMR TRACE (OFF)
ISMDR Trace is enabled for output. 0: OFF
1: ON
OFF
13
VIRTUAL TRACE DIP SW
SIP MSG TRACE (OFF)
SIP MSG Trace is enabled for
output.
0: OFF
1: ON
OFF
14
VIRTUAL TRACE DIP SW
FULL SIP TRACE (OFF)
FULL SIP Trace is enabled for
output.
0: OFF
1: ON
OFF
15
VIRTUAL TRACE DIP SW
HOTEL TRACE (OFF)
Hotel trace is enabled for output. 0: OFF
1: ON
OFF
16
VIRTUAL TRACE DIP SW
SIP EXT TRACE (OFF)
SIP EXT Trace is enabled for
output.
0: OFF
1: ON
OFF
17
VIRTUAL TRACE DIP SW
DEBUG TRACE (OFF)
DEBUG Trace is enabled for output. 0: OFF
1: ON
OFF
18
VIRTUAL TRACE DIP SW
IPATD TRACE (OFF)
IPATD Trace is enabled for output. 0: OFF
1: ON
OFF
19
VIRTUAL TRACE DIP SW
ISDN TRACE (OFF)
ISDN Trace is enabled for output. 0: OFF
1: ON
OFF
20
VIRTUAL TRACE DIP SW
SPI TRACE (OFF)
SPI Trace is enabled for output. 0: OFF
1: ON
OFF
21
VIRTUAL TRACE DIP SW
DECT TRACE (OFF)
DECT Trace is enabled for output. 0: OFF
1: ON
OFF
22
VIRTUAL TRACE DIP SW
HTTPXML T RACE (OFF)
HTTPXML Trace is enabled for
output.
0: OFF
1: ON
OFF