iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
252
Table 4.4.1.4-1 SYSTEM IP ADDRESS PLAN
ATTRIBUTE DESCRIPTION DEFAULT
Second System Net Mask Net mask of the second private IP addresses 255.255.255.0
Firewall IP Address
When the system is installed behind a NAPT server, the fixed IP
Address provided by the NAPT server must be assigned here.
Also, use this IP address to identify the MPB in remote devices.
0.0.0.0
DDNS Usage of Firewall
If the firewall of system has a dynamic IP address, you can use
Dynamic DNS by setting 'DDNS Usage of Firewall' and 'Domain
Name of Firewall'. Note that after IP address of firewall is
changed, VOIP (UCP) / VOIU (eMG) board will be restarted.
ON/OFF,
Domain Name of Firewall
First MAC Range
MAC Address Range to register a device if device MAC address
is included in range.
000000000000~
000000000000
Second MAC
Range
MAC Address Range to register a device if device MAC address
is included in range.
000000000000~
000000000000
DNS IP Address
IP Address of Domain Name Server, which iPECS system will use
to resolve a URL to an IP address. The DNS provides the
resolution after receiving the name from iPECS.
0.0.0.0
To Next Page
Loading...
