iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
- Added the special character to DB management.
- Added Ring detection register setting in Analog parameter.
- Added LCD Dimming for LIP-9000 Series & LDP-9240D in PGM 112.
- ‘Go to assignment’ function added to Personal group overview and
can check the master & member list at a glance.
- Added Station ICR scenario (1201) to Station Data.
- Changed the name from UCS Standard to UCS data.
- Added MOH management in Maintenance.
- Added Keyset admin password to Install Wizard.
- ‘Unified SMB A&P manual’ by integrating eMG and UCP.
2.1.x 1.6 August, 2016 - The type of Speed numbering is added more in PGM 100.
- ‘DDNS usage of Firewall’ & ‘Domain name of Firewall’ is added in
PGM 102.
- The LCD LED is changed to the option ‘MWI/Ring’ or ‘Ring’.
- The ACD & CRM function is added for UCS Client: CRM function
and ACD login/out & ACD On/Off duty in PGM 112.
- UCS Dialing Rule Use for Standard UCS in PGM 112.
- UCS Mobile Dial Use (Android) for Standard UCS in PGM 112.
- The description of CLI Name Display is changed, refer to PGM 113.
- Display full CLI function is added in PGM 113.
- SMTP Server Address fills out up to 64 characters in PGM 127.
- Proxy Server Address fills out up to 64 characters in PGM 133.
- The range for ICLID Usage is changed to Disable, CLI, Name/CLI in
PGM 140.
- Web hacking block is added in PGM 160; Web admin login failure
count to block, Web admin hacking block period, Wed admin
hacking Email notification.
- UCS Ring ACK count is added in PGM 160 and UCS Ring ACK
timer is added in PGM 180.
- SLT Line monitor and SLT Line Monitor time is added in PGM 160.
- Dial Back to Caller from Remote VM Access is added in PGM 160.
- Alarm Display is added in PGM 163.
- The range about Alarm is changed to Off, On, Alarm only,
Alarm/Email. Especially, the default of Maintenance Expire Notify is
Email only.
- Message wait (Call back) for LED flash is added in PGM 170.
- Outgoing Call type is added for All call or Answered call in PGM 177.
- Call log/Directory Auto Idle Timer is added in PGM 180.
- The range of Hot Desk for eMG and UCP is changed in PGM 250:
eMG80 (100), eMG800 (300), UCP (1200).
- Advice of Charge is added in PGM 133.
- SIP Profile is added in PGM 211.
- Signaling port, TLS Version, First & Second TLS crypto, SRTP
usage, First & Second SRTP crypto are added in PGM 212.
- Interworking system is added in PGM 322.
- Name option is deleted in PGM 327.
- Alarm display is added in PGM 335.
- Firewall IP is added in PGM 441.
- MS Excel-like table data management (copy/paste from/to the excel
file, Input/Edit) is to be extended to the following tables.
- PGM 105 : Flexible Station Number
- PGM 115/129 : Flexible Buttons
To Next Page
Loading...
