iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
296
Table 4.4.2.17-1 STATION VM ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
to the user when accessing the VSF.
Pre-selected
Message Language
The selected language is employed for prompts played
to an external CO caller if the called station has
activated Pre-selected Message.
Prompt 1~6 Prompt 2
Default VM group
number
When the user has no Voice messages and selects the
[Call Back/Msg] button, the “Default VM group number”
is called.
Auto Talk Recording
Option
This field enables unconditional recording of all calls
placed/received by the station. Recordings, in .wav
format, are stored at the UCS Client defined as the Call
Recording Station below.
OFF,
ALL,
CO
OFF
Auto Talk Recording
Destination
When Auto Call Recording is defined for a station, the
destination for the recording is defined here. The UCS
Client Station number, or an IPCR or 3
rd
party SIP
recording server.
Station or
Group
VSF MSG Date/Time
When ON, the data/time the message was received is
played to the user prior to the message.
OFF
ON
ON
VM Password check
When ON, the user must enter their valid Authorization
code to access their VSF Voice Mailbox. The password
can be defined as none, the Authorization code only or
the normal Station Number and Authorization code.
No password/
Password only/
Station number
and password
Password only
VMID Number
When using an adjunct VM, the system can translate the
Mailbox number from the user’s station number to the
assigned VMID. The system sends the station number
or VMID, if assigned, to the VM (in-band or SMDI) in
order to identify the appropriate Voice Mailbox.
Max. 8 digit
eMG80:100
eMG800:1000
UCP:1000
Retrieve MSG Method
Messages stored in the VSF may be retrieved in either a
FIFO (first-in-first-out) or LIFO (last-in-first-out) order
based on this entry.
FIFO/
LIFO
LIFO
Wake-Up
Announcement
A VSF system announcement can be recorded to play to
the station as a Wakeup Announcement.
0-200 0
Two way record
announcement
The two way record announcement can be recorded to
play to the station as Announcement.
0-200 0
Message Wait
Notice(MWI, CLI, VM)
When a user has voice mail, system can provides this
as voice prompt instead of dial tone according to option
based on station.
Disable: System provides normal dial tone when a user
goes to off hook status.
Tone: System provides warning tone instead of dial tone
to give indication when a user goes to off hook status.
Prompt: System provides message indication as voice
prompt when a user goes to off hook status.
DECT phone do not support this feature.
Disable,
Tone,
Prompt
Tone
Enhanced Attributes
VM Message No Number of Voice Messages in the user’s Mailbox. 000
VM COS
Each Voice Mailbox is assigned one of five VM Classes
of Service (COS) that determines basic characteristics
of the Mailbox such as message retention. The Voice
Mail COS attributes are set in PGM 253.
1-5 1
To Next Page
Loading...
