iPECS UCP - Page 315

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
300
Table 4.4.2.18-1 STATION CCR Table
ATTRIBUTE DESCRIPTION RANGE DEFAULT
# Button Used As
# can be used as the following:
 System Numbering Plan
 Replay Greeting
 Access Mailbox

Leave Message Immediate
System
Refer to
Description
Access
Mailbox
Table 4.4.2.18-2 STATION CCR DESTINATIONS
DESTINATION TYPES
Route to a Station
Route to a Station Group
Route with System Speed Dial
Route as PBX Transfer with System Speed Dial (Flash then dial speed dial digits)
Route to VSF Announcement
Route to VSF Announcement and disconnect
Route to Networked Station.
Conference Room
Internal Page
External page
All Call Page
Route to voice mail(station group/station number)
Company Directory
Record VM Greeting
Room type conference group join