iPECS UCP - 4.7 Direct Inward Dialing (DID)

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
302
Selecting Station Name Display will display the Station Name input page. Enter a valid Station
range and click [Load] to enter the Station Name data. For convenience, the copy, paste, and
drag is available to enter or modify data. Click [Save] button after changing the type or value.
Figure 4.4.2.19-2 Station Name Display
You can fill out the Station name, Input name (up to 20 digits), company directory-First name &
Last name for customer’s convenience.